Grizzly G0763 owner manual Power Feed Controls, Handwheels

Power Feed Controls

H I

G

		J
L	K

Figure 3. Power feed controls.

Refer to Power Feeds on Page 31 for detailed instructions on operating the power feeds.

G.ON/OFF Switch: Enables power to the power feed unit.

H.X-Axis Speed Control Knob: Controls the speed of table movement along the X-axis.

I.Y-Axis Speed Control Knob: Controls the speed of table movement along the Y-axis.

J.Y-Axis Mode Selector Switch: Selects the mode of operation for the Y-axis—jog (the “T”), manual (the “hand”), or automatic (the “table” symbol).

K.Y-Axis Reverse Button: Reverses the direc- tion of Y-axis table movement.

L.X-Axis Mode Selector Switch: Selects the mode of operation for the X-axis—manual (the “hand”) or automatic (the “table” symbol).

Model G0763 (Mfg. Since 8/13)

Handwheels

P

O

M

N

Figure 4. Handwheel controls.

M.X-Axis Handwheel: Manually controls X-axis table movement.

N.Y-Axis Handwheel: Manually controls Y-axis table movement. The graduated dial has 0.0005" increments with one full revolution equaling 0.1000" of table travel.

O.Coolant Valve: Controls the flow of coolant when coolant pump is turned ON.

P.Z-Axis Handwheel: Manually controls Z-axis grinding wheel movement. The graduated dial has 0.0002" increments with one full revolution equaling 0.0500" of table travel.

-5-