Grizzly G3358 owner manual Inventory Clean Up, Crate Contents Figure Qty

Inventory Clean Up

The following is a description of the main compo- nents shipped with your machine.

Crate Contents (Figure 3) Qty

A.Model G3358 Milling/Drilling Machine

	(not shown)	1
B.	Handwheels	3
C.	Drill Chuck	1
D.	Chuck Key	1
E.	Drill Chuck Collet R8-JT3	1
F.	Head Crank	1
G.	Handles	4
H.	Column Cap	1
I.	Cap Screws M8-1.25 x 25mm	2
J.	Socket Wrench 24mm	1
K.	Face Mill w/4 HSS Bits	1
L.	Feed Levers	3
M. Hex Wrenches 4, 5, 6mm		3
	B
	G

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser shown in Figure 4. For thorough cleaning, some parts must be removed. For opti- mum performance from your machine, clean all moving parts or sliding contact surfaces. Avoid chlorine-based solvents, such as acetone or brake parts cleaner that may damage painted surfaces. Always follow the manufacturer’s instruc- tions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

J

F

G

H

I

M

E

K

L

D

C

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser

Figure 3. Inventory.

-12-

A great product for removing the waxy shipping grease from your machine during clean up.

Figure 4. Cleaner/degreaser available from

Grizzly.

G3358 Milling/Drilling Machine