Identification
Figure 1. Model G3358 Identification.
A.Directional Switch—Turns the machine ON and changes directional rotation of spin- dle from clockwise to counterclockwise.
B.Micro-Adjustment Handwheel—Controls depth of cut by 0.001" increments.
C.Depth Stop—Allows you to make repeated cuts to the same depth.
D.3" Face Mill—Performs facing cuts on large surfaces.
E.Longitudinal Stops—Limits table travel for repeatable positioning.
F.Cast Iron Base—Keeps vibrations to a minimum, ensuring precision.
G.Micro-Adjustment Lock Knob—Must be tightened to engage the Micro-Adjustment Handwheel.
H.Quill Downfeed Levers—Control coarse vertical movement of the quill.
I.Longitudinal (X-Axis) Handwheel—Allow longitudinal table travel.
J.Cross (Y-Axis) Handwheel—Allow cross table travel.
G3358 Milling/Drilling Machine | -3- |
G
E F 
