SECTION 4: OPERATIONS
Operation Safety | Basic Controls | |
|
|
|
|
|
|
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes could result from using this machine without proper protective gear. Always wear safety glasses or a face shield when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all times to reduce this risk.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
G3358 Milling/Drilling Machine
Use the descriptions and figures below to become familiar with the basic controls of your machine.
FWD/OFF/REV Switch: Controls the direction of the spindle and turns main power to the machine ON/OFF.
Depth Stop: Stops the spindle travel at a pre- determined depth.
Spindle Lock: Locks the spindle in position verti- cally.
FWD/OFF/REV Switch
Depth Stop
Spindle Lock
