Main Specifications: |
|
Operation Info |
|
Spindle Travel | 5 in. |
Swing | |
Longitudinal Table Travel | |
Cross Table Travel | 7 in. |
Ram Travel | 12 in. |
Head Travel | 5 in. |
Head Swivel | 360 deg. |
Turret Or Column Swivel | 360 deg. |
Max. Dist Spindle To Column | 7 in. |
Max. Dist Spindle To Table |
|
Drilling Cap For Cast Iron | |
Drilling Cap For Steel | |
No. Of Vert. Spindle Speeds | 12 |
Range Of Vert. Spindle Speeds | 120 - 2500 RPM |
Quill Dia | 2.950 in. |
Table Info |
|
Table Length | |
Table Width | |
Table Thickness | |
No. Of T Slots | 4 |
T Slots Width | 0.550 in. |
T Slots Height | 0.850 in. |
T Slots Centers | |
Stud Size | 3/8 in. |
Spindle Info |
|
Spindle Taper | |
Spindle Sleeve Diameter | 3 in. |
End Milling Cap | 3/4 in. |
Face Milling Cap | 3 in. |
Draw Bar Diameter | 7/16 in. |
Draw Bar TPI | 20 |
Draw Bar Length | |
Spindle Bearings | Tapered Roller |
Lead Screw Info |
|
Lead Screw Diameter | 15/16 in. |
Lead Screw TPI | 10 |
Lead Screw Length | 32 in. |
Construction |
|
Spindle Housing Const | Cast Iron |
Table Const | Surface Ground Cast Iron |
Head Const | Cast Iron |
Column Const | Cast Iron |
Base Const | Cast Iron |
Paint | Epoxy |
Other |
|
Collars Calibrated | 0.001 in. |
Column Dia | |
Optional Stand | G5944 |
Mobile Base | G7314 |
Model G3358 | The information contained herein is deemed accurate as of 5/27/2008 and represents our most recent product specifications. | PAGE 2 OF 3 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. | ||
G3358 Milling/Drilling Machine |