Additional Safety for Mills
1.UNDERSTANDING CONTROLS. Make sure you understand the use and operation of all controls.
2.Safety accessories. Always use a chip guard in addition to your safety glasses when milling to prevent bodily injury.
3.WORK HOLDING. Before starting the machine, be certain the workpiece has been properly clamped to the table. NEVER hold the workpiece by hand when using the mill.
4.CHUCK KEY SAFETY. Always remove your chuck key, drawbar wrench, and any service tools immediately after use.
5.SPINDLE SPEEDS. Select the spindle speed that is appropriate for the type of work and material. Allow the machine to gain full speed before beginning a cut.
6.POWER DISRUPTION. In the event of a local power outage during use of the machine, turn OFF all switches to avoid possible sud- den start up once power is restored.
7.SPINDLE DIRECTION CHANGES. Never reverse spindle direction while the machine is in motion.
8.STOPPING SPINDLE. DO NOT stop the machine using your hand against the chuck.
9.BE ATTENTIVE. DO NOT leave machine running unattended for any reason.
10.MACHINE CARE AND MAINTENANCE.
Never operate the mill with damaged or worn parts. Maintain your mill in proper working condition. Perform routine inspections and maintenance promptly. Put away adjustment tools after use.
11.DISCONNECT POWER. Make sure the mill is turned off, disconnected from its power source and all moving parts have come to a complete stop before starting any inspection, adjustment, or maintenance procedure.
12.AVOIDING ENTANGLEMENT. Keep loose clothing articles such as sleeves, belts or jewelry items away from the spindle. Never wear gloves when operating the machine.
13.TOOL HOLDING. Always use the proper tools for the material you are machining. Make sure they are held firmly in the proper tool holder for the job.
14.
15.CUTTING TOOL INSPECTION. Inspect drills and end mills for sharpness, chips, or cracks before each use. Replace dull, chipped, or cracked cutting tools immediately. Handle new cutting tools with care. Leading edges are very sharp and can cause lacerations.
16.EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties per- forming the intended operation, stop using the machine! Contact our Technical Support at (570)
Like all machinery there is potential danger when operating this machine. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the pos- sibility of operator injury. If normal safety precautions are overlooked or ignored, seri- ous personal injury may occur.
G3358 Milling/Drilling Machine
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per- sonal injury, damage to equipment, or poor work results.
