TROUBLESHOOTING

Please make these simple checks before calling service.These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.

 

 

 

 

 

Symptoms

 

Items to Check and Actions to follow

 

 

 

 

 

 

English

 

 

to high rise buildings or hills. Using a highly directional

 

“Ghost” or double image

This may be caused by obstruction to the antenna due

 

 

 

 

antenna may improve the picture.

 

 

 

 

 

 

 

No power

Check if the TV’s AC power cord is plugged into the

 

 

 

 

 

mains socket.

 

 

 

• Unplug the TV, wait for 60 seconds.Then reinsert plug

 

 

 

 

into the mains socket and turn on the TV again.

 

 

 

 

 

 

 

No picture

Check antenna connections at the rear of the TV to see

 

 

 

 

if it is properly connected to the TV.

 

 

 

Possible broadcast station trouble.

 

 

 

 

Try another channel.

 

 

 

Adjust the contrast and brightness settings.

 

 

 

• Check the Closed Captions control. Some TEXT modes

 

 

 

 

could block the screen.

 

 

 

 

 

 

 

Good picture but no

Increase the VOLUME.

 

 

sound

Check if the TV is muted; press the MUTE button on the

 

 

 

 

remote control.

 

 

 

 

 

 

 

Good sound but poor

Adjust the contrast, color and brightness settings.

 

 

color

 

 

 

 

 

 

 

 

 

Poor picture

Poor picture quality may occur when an activated S-VHS

 

 

 

 

camera or camcorder is connected to your TV and the

 

 

 

 

other peripheral at the same time. Switch off one of the

 

 

 

 

peripherals.

 

 

 

 

 

 

 

Snowy picture and noise

Check the antenna connection.

 

 

 

 

 

 

 

Horizontal dotted line

This may be caused by electrical interference (e.g. hair

 

 

 

 

dryer, nearby neon lights, etc.)

 

 

 

Turn off the equipment.

 

 

 

 

 

 

 

Television not responding

Check whether the batteries are working. Replace if

 

 

to remote control

 

necessary.

 

 

 

Clean the remote control sensor lens on the TV.

 

 

 

You can still use the buttons at the front of your TV.

 

 

 

• Select the TV mode to ensure your remote control is set

 

 

 

 

in the TV mode.

 

 

 

 

 

 

 

31

Page 33
Image 33
Haier LE42D2380, LE46D2380, LE32D2320, LE39D2380 user manual Troubleshooting, Symptoms Items to Check and Actions to follow