HandHeld Entertainment Quick Check 890 manual USB Communication Interface, USB COM Port Emulation

USB Communication Interface

For the USB interface, the Hand Held Products CDC-ACM driver must be installed prior to using the QC890 Verifier. This driver is copied to the following directory during install:

<install location>\Drivers\USBCOMPortEmulation/hhpcdc.inf

The default <install location> is C:\Program Files\Hand Held Products\Quick Check ImageData\drivers\USBCOMPortEmulation.

!Review the file, readme.rtf, in the install location prior to running the QCID.

Connect the QC890 Verifier to the host as shown in the illustration below.

1

2

USB COM Port Emulation

Scan the following barcode to program the QC890 Verifier to emulate an RS- 232-based COM Port. After connecting the QC890 Verifier and upon successful installation of the USB driver, the driver will use the next available COM Port. USB COM Port Emulation is the default interface for the QC890 Verifier.

* USB COM Port Emulation

Note: No additional configuration (e.g., baud rate) is necessary.

2 - 2 Quick Check® 890 User’s Guide