Harbor Freight Tools 46813 manual Figure K

RIP FENCE (#10C)

LOCK BLOCK (#7C)

SAW TABLE

REAR RAIL (#3H)

FIGURE K

SCALE INDICATOR

(#20C)

RIP FENCE	FRONT RAIL
(#10C)
	(#7H)
SAW TABLE
(#17H)
	FINE ADJUSTMENT
	KNOB (#30C)
	RIP FENCE HANDLE
	(#37C)
	FIGURE L

To Attach The Power Switch:

1.Insert two Semi-Circle Head Screws (part #2E) from the rear of the Switch Plate (part #3E). Then, loosely screw one Square Nut (part #4E) onto each Semi-Circle Head Screw. (See Figures B, G, and Assy. Diagram E.)

2.While holding the Switch Plate (part #3E) to the front, insert and slide the two Square Nuts (part #4E) into the lower slot of the Front Rail (part #7H).

(See Figures B, G, and Assy. Diagram E.)

3.Slide the Switch Plate (part #3E) to a convenient position. Then, secure the entire Switch Assembly (parts #1E through #12E) to the Front Rail (part #7H) by tightening the two Semi-Circle Head Screws (part #2E).

(See Figures B, G, and Assy. Diagram E.)

SKU 46813 PAGE 16