Harbor Freight Tools 46813 manual

2.Before each use, inspect the general condition of the 10" Table Saw. Inspect the Power Switch (part #8E), Power Plug and Cord Assembly (part #8F), and extension cord (if used) for damage. Check for loose screws, misalignment, binding of moving parts, broken, cracked, or improper mounting of the 10" Saw Blade (part #14-I), broken parts and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, turn off the 10" Table Saw immediately and have the problem corrected before further use. Do not use damaged equipment. (See Assy. Diagrams A through I.)

3.With a brush, soft cloth, or vacuum, remove all sawdust from the 10" Table Saw. Do not use solvents to wipe off the 10" Table Saw, as damage may result. If necessary, wipe with a damp cloth. You may use a mild detergent.

Do not introduce water into the electric motor through the motor vents.

4.Once clean, lubricate all moving parts with a light weight oil. When storing, keep the 10" Table Saw covered with a cloth cover.

SKU 46813 PAGE 25