AVR 235 Audio/Video Receiver
OWNER’S MANUAL
0 - number in an oval indicates a button or indicator on the remote
Table of Contents
2 TABLE OF CONTENTS
Installation and Connections
Seven channels of high-current amplification
Description and Features
Introduction
a variety of modes and two modes of VMAx
4 SAFETY INFORMATION
Safety Information
Important Safety Information
Handle the AC Power Cord Gently
Front Panel Controls
7 @ #
information on digital audio
# Preset Stations Selector Press this
Û Digital Input Selector When playing a
Front Panel Controls
Rear Panel Connections
Digital Audio Outputs Connect these
AC Power Cord Connect the AC plug to an unswitched AC wall output
Unswitched Outlet
Switched Outlet
Rear Panel Connections
Main Remote Control Functions
See page 31 for more information
10 MAIN REMOTE CONTROL FUNCTIONS
7 6-Channel/8 Channel Direct Input
G Digital Select Press this button to assign
7 CH STEREO appears, the stereo signal is routed to all five speakers, if installed.See page 21 for more information on stereo playback modes
Main Remote Control Functions
MAIN REMOTE CONTROL FUNCTIONS
Audio Equipment Connections
Installation and Connections
12 INSTALLATION AND CONNECTIONS
1. Connect the analog output of a CD player to the CD inputs
SCART A/V Connections
INSTALLATION AND CONNECTIONS
Video Equipment Connections
on the AVR
AC Power Connections
System and Power Connections
Main Room Remote Control Extension
Note for RGB signal with SCART
Installation and Connections
Speaker Placement
Speaker Selection
INSTALLATION AND CONNECTIONS
System Setup
System Configuration
Using the On-Screen Display
16 SYSTEM CONFIGURATION
Set Button Fto bring up the SPEAKER SETUP menu Figure
Input Setup
Speaker Setup
SYSTEM CONFIGURATION
opposed to a movie from a DVD player, VCR or cable/satellite set top
System Configuration
System Configuration
one of the settings, please proceed by pressing the
Night Mode Settings
Surround Setup
the setting to your taste
20 SYSTEM CONFIGURATION
Stereo-Direct Bypass Mode
Configuring the Surround Off Stereo Modes
tings OFF When OFF is highlighted, the Night mode will not function
System Configuration
Delay Settings
2. Press the Set Button F@to activate the configuration menu
Indicators is lit you are in the Stereo-Direct Bypass mode
22 SYSTEM CONFIGURATION
5. Press and hold the SPL Indicator Select
Output Level Adjustment
Using EzSet
System Configuration
24 SYSTEM CONFIGURATION
Volume until you can hear the test noise clearly
When all channels have the same output level
E is then pressed to select OFF in the highlighted video
Note that any settings changed at any time, also when the discrete buttons are used only, will be stored in memory in the AVR, also if it´s turned off completely, unless it will be reset see page
System Configuration
SYSTEM CONFIGURATION
Operation
Surround Mode Chart
FEATURES
MODE
Operation
Surround Mode Chart
FEATURES
MODE
Using the Sleep Timer
Switched AC Outlets and the Power
Indicator 3will turn orange
AVR Selector 5to have the remote control the AVR functions
Surround Mode Selection
Controls and Use of Headphones
Volume Up/Down buttons
button
until SURR OFF appears in the Main Information Display ˜
Digital Bitstream Indicators
Digital Audio Playback
Dolby Digital
Surround Mode Types
Speaker/Channel Indicators
2.0 audio, while the main feature is available in
PCM Playback Indications
Tape Recording
Output Level Adjustment With Source Signals
Normal output level adjustment for the
Night Mode
Indicator Select
Advanced Features
Memory Backup
indicator off
Full-OSD Time Out Adjustment
Turn On Volume Level
Semi-OSD Settings
adjustment, use the ‹/› buttons E
Recalling Preset Stations
Default Surround Mode
Preset Tuning
Tuner Operation
RDS Display Options
RDS Tuning
RDS Operation
Program Search PTY
Programming the Remote with Codes
that the Program/SPL Indicator 2will
Programming the Remote
Code Readout
Notes on Using the AVR Remote With Other Devices
Volume Punch-Through
Erasing Macro Commands
the Volume Control and the Mute
Transport Control Punch-Through
Resetting the Remote Memory
Channel Control Punch-Through
by the AVR Input Selector
Volume Up
Power On
Power Off
Volume Down
Tun-M 9 0 Memory Tune Up Direct Clear Preset Up Tune Down OSD RDS
Button Name Power On Power Off Mute AVR DVD CD Tape VID VID VID VID
T/V select Volume Up Surround Select Night
Preset Down M1 M2 M3 M4 Dolby DTS SURR
SYMPTOM
Troubleshooting Guide
Processor Reset
SOLUTION
FM Tuner Section
Technical Specifications
Audio Section
AM Tuner Section
Harman Consumer Group International
Part No. CQX1A953Z