AVR 235 Audio/Video Receiver
OWNER’S MANUAL
Table of Contents
2 TABLE OF CONTENTS
0 - number in an oval indicates a button or indicator on the remote
Installation and Connections
Description and Features
Introduction
Seven channels of high-current amplification
a variety of modes and two modes of VMAx
Safety Information
Important Safety Information
4 SAFETY INFORMATION
Handle the AC Power Cord Gently
Front Panel Controls
7 @ #
# Preset Stations Selector Press this
Û Digital Input Selector When playing a
information on digital audio
Front Panel Controls
Rear Panel Connections
Digital Audio Outputs Connect these
Unswitched Outlet
Switched Outlet
AC Power Cord Connect the AC plug to an unswitched AC wall output
Rear Panel Connections
Main Remote Control Functions
10 MAIN REMOTE CONTROL FUNCTIONS
7 6-Channel/8 Channel Direct Input
See page 31 for more information
G Digital Select Press this button to assign
7 CH STEREO appears, the stereo signal is routed to all five speakers, if installed.See page 21 for more information on stereo playback modes
Main Remote Control Functions
MAIN REMOTE CONTROL FUNCTIONS
Installation and Connections
12 INSTALLATION AND CONNECTIONS
Audio Equipment Connections
1. Connect the analog output of a CD player to the CD inputs
INSTALLATION AND CONNECTIONS
Video Equipment Connections
SCART A/V Connections
on the AVR
System and Power Connections
Main Room Remote Control Extension
AC Power Connections
Note for RGB signal with SCART
Speaker Placement
Speaker Selection
Installation and Connections
INSTALLATION AND CONNECTIONS
System Configuration
Using the On-Screen Display
System Setup
16 SYSTEM CONFIGURATION
Input Setup
Speaker Setup
Set Button Fto bring up the SPEAKER SETUP menu Figure
SYSTEM CONFIGURATION
opposed to a movie from a DVD player, VCR or cable/satellite set top
System Configuration
System Configuration
one of the settings, please proceed by pressing the
Surround Setup
the setting to your taste
Night Mode Settings
20 SYSTEM CONFIGURATION
Configuring the Surround Off Stereo Modes
tings OFF When OFF is highlighted, the Night mode will not function
Stereo-Direct Bypass Mode
System Configuration
2. Press the Set Button F@to activate the configuration menu
Stereo-Digital Mode
Indicators is lit you are in the Stereo-Direct Bypass mode
Delay Settings
Output Level Adjustment
Using EzSet
5. Press and hold the SPL Indicator Select
System Configuration
Volume until you can hear the test noise clearly
When all channels have the same output level
24 SYSTEM CONFIGURATION
E is then pressed to select OFF in the highlighted video
Note that any settings changed at any time, also when the discrete buttons are used only, will be stored in memory in the AVR, also if it´s turned off completely, unless it will be reset see page
System Configuration
SYSTEM CONFIGURATION
Surround Mode Chart
FEATURES
DELAY TIME RANGE
Operation
Surround Mode Chart
FEATURES
DELAY TIME RANGE
Operation
Switched AC Outlets and the Power
Indicator 3will turn orange
Using the Sleep Timer
AVR Selector 5to have the remote control the AVR functions
Surround Mode Selection
Controls and Use of Headphones
Volume Up/Down buttons
button
Digital Bitstream Indicators
Digital Audio Playback
until SURR OFF appears in the Main Information Display ˜
Dolby Digital
Surround Mode Types
Speaker/Channel Indicators
2.0 audio, while the main feature is available in
PCM Playback Indications
Output Level Adjustment With Source Signals
Night Mode
Normal output level adjustment for the
Tape Recording
Advanced Features
Memory Backup
Indicator Select
indicator off
Turn On Volume Level
Semi-OSD Settings
Full-OSD Time Out Adjustment
adjustment, use the ‹/› buttons E
Default Surround Mode
3. Press the Tuner Mode button Ion the
Preset Tuning
Recalling Preset Stations
RDS Tuning
RDS Operation
RDS Display Options
Program Search PTY
that the Program/SPL Indicator 2will
Programming the Remote
Programming the Remote with Codes
Code Readout
Volume Punch-Through
Erasing Macro Commands
Notes on Using the AVR Remote With Other Devices
the Volume Control and the Mute
Resetting the Remote Memory
Channel Control Punch-Through
Transport Control Punch-Through
by the AVR Input Selector
Power On
Power Off
Volume Up
Volume Down
Button Name Power On Power Off Mute AVR DVD CD Tape VID VID VID VID
T/V select Volume Up Surround Select Night
Delay/Prev. Ch. 1 2 3 4 5 6 7
Tun-M 9 0 Memory Tune Up Direct Clear Preset Up Tune Down OSD RDS
Troubleshooting Guide
Processor Reset
SYMPTOM
SOLUTION
Technical Specifications
Audio Section
FM Tuner Section
AM Tuner Section
Harman Consumer Group International
Part No. CQX1A953Z