Harman-Kardon HS 500 owner manual Step Six Configure Sources, TV Source Menu

Step Six – Configure Sources

This is the last step in the configuration process. It is necessary so that the correct inputs are selected as you use various sources with your HS 500.

NOTE: If you have not connected any devices to the TV or D-IN input jacks on the HS 500, then you may skip this step. You are now ready to begin enjoying the finest in home entertainment using your HS 500 system. Turn to the Operation section to learn how to make the most of the many features of the

HS 500.

Select the TV, AUX or D-IN source either by pressing its Source Selector on the remote (see Figure 47), or by pressing the OSD button and using the ‹/› Buttons to select the source from the list at the top of the screen. See Figure 48 for the screen for the TV source.

INITIAL SETUP

Figure 49 – Digital Input (D-IN) Source Menu

Use the ¤ Button to select the Digital Input setting line, and press the Enter Button to view the options of Coaxial or Optical digital audio input. Select the input to which you have connected the source device you wish to listen to, and press the Enter Button.

You may also select a surround mode for this source at the Audio setting line, and you may adjust the volume level for this source at the Level Adjustment setting line, but it is not necessary to make these adjustments now. These settings only apply to the D-IN source.

You are now ready to begin enjoying the finest in home entertainment with your HS 500 home theater system!

Figure 47 – Source Selectors

Figure 48 – TV Source Menu

Press the Enter Button to access the TV menu settings, and use the

¤Button to select the Audio Input setting. Press the Enter Button to display the input options: Coaxial or Optical (digital audio) or Line (analog audio). Use the ‹/› buttons to select the input to which you connected your TV’s audio output, and press the Enter Button.

You may also select a surround mode for this source at the Audio setting line, and you may adjust the volume level for this source at the Level Adjustment setting line, but it is not necessary to make these adjustments now. These settings only apply to the TV source.

To configure the D-IN (Digital Input) source, use the Navigation Buttons to highlight D-IN on the top line, and press the Enter Button to access the settings for the D-IN source. See Figure 49.

33