Harman-Kardon HS 500 owner manual Headphones, Source Selection

OPERATION

decreasing one and increasing the other by the same amount – using the Audio Adjustments submenu. This achieves the same effect as using a balance control.

Headphones

Plug the 1/8" plug on a pair of headphones into the headphone jack on the right side of the HS 500 for private listening.

Figure 54 – Headphone Jack

The HS 500 cannot accommodate a 1/4” headphone plug without an adapter (not included). Using the headphones output mutes the speakers.

Source Selection

Most of the time you may find it convenient to select a source by pressing its Source Selector on the remote. See Figure 51.

Pressing a Source Selector not only selects that source as the HS 500’s input, but also turns on the HS 500 if it is in Standby mode, and switches the remote to the mode that operates the source.

NOTE: Press the Mode button on the remote to switch it to operate another device without changing the source selection for the HS 500. See Figure 55.

The adjustment is called DVD Sound Mode for the Disc Player, and is adjusted using the System Audio Setup submenu. There is no surround sound processing available for materials on USB devices, and they are always played in their original formats.

3.For the TV, AUX and D-IN sources, the HS 500 will adjust the audio level (volume) for that source only, based on the setting in the Source submenu.

NOTE: Pressing the Open/Close button always causes the HS 500 to select the Disc Player as the source.

The following sections describe the operation of the internal disc player and tuner, as well as the other sources.

Figure 55 – Mode Button on Remote

When the source is selected, the HS 500 will make the following selections as appropriate to the source:

1.For the TV and D-IN sources, the HS 500 will select the correct analog or digital audio input. See Step Six of the Initial Setup section for more information on configuring the audio input.

2.For all sources, the HS 500 will select the correct audio, or surround sound, mode. The Audio Mode setting is adjusted using the Source submenu for the RADIO, TV, AUX and D-IN sources.

35