CAUTION
Improper operation of a hoist can create a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, or property damage. To avoid such a potentially hazardous situation THE OPERATOR SHALL:
•Maintain a firm footing or be otherwise secured when operating the hoist.
•Check brake function by tensioning the hoist prior to each lift operation.
•Use hook latches. Latches are to retain slings, chains, etc. under slack conditions only.
•Make sure the hook latches are closed and not supporting any parts of the load.
•Make sure the load is free to move and will clear all obstructions.
•Avoid swinging the load or hook.
•Make sure hook travel is in the same direction as shown on controls.
•Inspect the hoist regularly, replace damaged or worn parts, and keep appropriate records of maintenance.
•Use the hoist manufacturer’s recommended parts when repairing the unit.
•Lubricate load chain per hoist manufacturer’s recommendations.
•NOT use the hoist load limiting or warning device to measure load.
•NOT use limit switches as routine operating stops. They are emergency devices only.
•NOT allow your attention to be diverted from operating the hoist.
•NOT allow the hoist to be subjected to sharp contact with other hoists, structures, or objects through misuse.
•NOT adjust or repair the hoist unless qualified to perform such adjustments or repairs.
4.3Hoist Controls
4.3.1For hoists mounted to motorized trolleys follow the control instruction included in the trolley ‘s Owner’s Manual.
4.3.2Pendant Control - When using the pendant control depress the up lever to raise the hoist or the down lever to lower the hoist as shown in Figure
Figure 4-1 Pendant Control
21
