Harrington Hoists TCR owner manual Adjusting the Controls, Cord Control

4.3.3Cord Control - When using a hoist with cord control, pull down on the appropriate colored cord to raise or lower the hoist. White indicates the raise control and red indicates lowering control. Release the cords to stop the hoist. Refer to Figure 4-2 below.

	Figure 4-2Cord Control
4.3.4	CAUTION Make sure the motor completely stops before reversing direction.

4.4Adjusting the Controls

4.4.1For pendant control, the speed can be adjusted by the amount the lever is depressed. As shown below in Figure 4-3, by depressing the lever slightly, you will be able control the hoist’s motions slowly and with more precision. By depressing the lever further, the speed of the hoist will be increased until the lever is fully depressed.

4.4.2For the cord type control, adjust the speed by varying the amount of pull on the cord. Refer to Figure 4-4.

Figure 4-4Cord Control Speed Adjustment

22