1

23

Browse shortcut !

There is also a one-button short- cut for changing the browse filter.

To use it, press and hold (do not click!) the Instant Approval but- ton until the approval status colour appears. Browsing will then only display the images with that classification.

Note that you can also select media using just the (+) and (-) buttons while browsing images. This method also enables you to select a batch as you zoom in from media to batch to thumbnails to preview. See Navigating Media and Batches for complete details about this method.

Browse

The browse filter complements the instant-approval system by enabling you to browse through images according to their approval status. You have the following choices:

All: browses all of the images in the current batch, regardless of their approval status. This is the default.

Red: browses only red-status images from the current batch. These are images that you have marked for likely deletion. You might browse these images to make sure you have not eliminated any usable images and/or to find images that you can delete to make room for new shots.

Green: browses only green-status images from the current batch. These are either new shots that did not trigger an exposure warning or shots that you manually assigned to green after overriding an exposure warning.

Green & Yellow: browses green and yellow-status images, but does not show red-status images. These are probably images that you have either decided to keep or not yet checked for approval status.

For more information about using the instant-approval system, please see Using Instant Approval Architecture.

To set the browse filter using the menus:

1.Select the MAIN MENU > Browse entry. The current setting is displayed here.

2.Use the or button to step through the filter options (described above) until you have selected the filter you wish to use.

3.Either move on to another setting by using the navigator but- ton or press the menu button to exit the menu system and keep your setting.

The appearance of the ‘Empty Browse Filter’ message signifies that there are no images with that particular approval status.

34

Page 34
Image 34
Hasselblad CF22 CF39 user manual Browse, To set the browse filter using the menus