List), Factory Reset, Save Configuration, or Firmware Upgrade. Click on the desired setup item to expand the page in the main navigation pane. The setup pages covered in this utility are described below.
WAN Port
The opening screen contains settings interface. Click on the down arrow mode on the list.
for the Global (Internet connection) to select the desired Internet connection
Obtain configuration automatically | For users who are using Cable Modem | |
(CATV dynamic mode) | Internet service. | |
| For users who are using xDSL Internet | |
PPPoE (DSL dynamic mode) | service that runs PPPoE. If your xDSL | |
service uses PPPoE, after installing the | ||
| IP Sharing device, do not run PPPoE | |
| software on your computers. | |
Static configuration | Select this item when the ISP assigns a | |
static IP address for your account. | ||
|
CATV dynamic Mode
Selecting this mode enables you to obtain a dynamic IP address from your ISP via DHCP support. Once the IP address is obtained, you can access the Internet. For most cases, this page needs no input. However, some ISPs may require some information for identification purposes. For example: Device/Computer name and Domain Name - please enter the information required to complete the settings.
