Hawking Technology H-BR49 manual Appendix C WAN Port Link Status PPPoE link status

Appendix C: WAN PORT LINK STATUS

PPPoE link status

“PPPoE offline. Ready to			The device’s wan port is not connected to the ISP’s
connect.”			dial-up server. The dial-up connection to the Internet
			is now available.
"Connecting to server."			The device's WAN port is now dialing the dial-up
			server.
"Server found."			The device dialed the dial-up server, and is
			negotiating with the dial-up server.
"Start PPP negotiation."			Negotiation is ongoing.
"Authentication (PAP)."			The server is verifying the dial-up account using the
			PAP method.
"Authentication (CHAP)."			The server is verifying the dial-up account using the
			CHAP method.
"Obtaining WAN IP address."			Authentication is successful.		The device is now
			obtaining the IP address from the dial-up server.
"Connect successfully."			The device dialed the server successfully. The user
			can now connect to the internet.
"Can not find server."			The device cannot dial the dial-up server. Dial-up to
			the server failed.
"Fail on LCP stage."			Configuration for the network link failed.
"Authentication (PAP) failure."			Failed in authentication; failure was caused by an
			incorrect password.
"Authentication (CHAP)			Identification verification of the device dial-up
failure."			account failed.
"Fail to Obtain WAN IP			The device cannot obtain the IP address from the
address."			dial-up server. Dial-up to the server failed.
"Server	dropped	the	The server cut the device's		internet connection.
connection."			The device is disconnected from the Internet.
"Disconnect on idle."			The device has been idle longer than the idle interval
			and was cut off from the connection. The idle
			interval value was set in the field "Auto-disconnect if
			idle xxx Minutes".
"Connection establishment			The device was re-trying dial-up to the server and
timeout."			failed.	The device finally	gave up dialing the
			server.