Hawking Technology H-BR49 manual ALERT function, Check E-Mail, Email Account

Check E-Mail

Check E-Mail: You may input your mail account on this IP Share and the device will check e-mails at the frequency that you previously set for the desired interval time.

1.Select the LED number and enter the account name, password, the name of the incoming mail server (POP3: i.e. mail.myaccount.com) and the interval to check mail.

2.Check Enable to enable this IP Share to indicate when there’s email(s)

detected.

Depending on the number of emails in the mailbox, the MAIL ALERT LED will flash in different frequencies. For details on the email LED indication, refer to the previous section, titled “Parts Names and Functions”.

Check to enable the MAIL

ALERT function.

		Figure 19
Email Account
Account		Enter the email account name you want to check for email information.
Password		Enter the password for the above email account for authentication.
Incoming Mail		Enter the incoming mail server name (POP3) corresponding to the email
Server		account you want to check.
Interval to check		Enter the time interval that you would like the device to check the email.
UNDO	Click UNDO to clear all the settings on this page.
SAVE	After completing the settings on this page, click SAVE to save the
	settings.