Manuals / Hawking Technology / Computer Equipment / Network Router

Hawking Technology H-BR49 manual Reply from 192.168.0.1 bytes=32 time=3ms TTL=100

Models: H-BR49

1 67

Download 67 pages 47.29 Kb

Page 63

Reply from 192.168.0.1: bytes=32 time=3ms TTL=100

4.The server (IP address) is online if the following message appears:

Reply from 192.168.0.1: bytes=32 time=3ms TTL=100

5.The destination device is not reachable if the following message appears:

Reply from 192.168.0.1: Destination host unreachable or Request timed out.

ISP Connectivity Checkup

Issue a PING command to the IP address of your ISP’s gateway or DNS server.

For Example:

If the DNS server address is 203.66.81.254, enter Ping 203.66.81.254 at the C:\> prompt. If successful, you will be able to reach your ISP server. If unsuccessful (Request timeout), you may have trouble connecting to your ISP. Please verify that the product is properly configured to connect to your ISP. Also verify that both your Cable/DSL modem and the line are functioning.

Internet Connectivity Checkup

PING to an IP address or domain name on the Internet.

For Example:

C:\> P ING 168.95.192.1 –w 5000

C:\> PING www.yahoo.com –w 5000

If successful, you will be connected to the Internet.

If you can ping the ISP’s gateway, but cannot ping a specific site (e.g., www.yahoo.com) on the Internet, it is possible that your ISP has an internal problem (the DNS server is not available).

Getting Technical Support

For further problems, please contact the distributor.

Image 63

Hawking Technology H-BR49 manual Reply from 192.168.0.1 bytes=32 time=3ms TTL=100, ISP Connectivity Checkup

Contents

4-Port Broadband Router H-BR49Trademarks & Copyright FCC CertificationsCE Mark Warning HAWKING LIMITED WARRANTY Configuration via GUI……………………………………………………………….43 Factory Default Settings…………………………………………………………….10Configuration via the Web……………………………………………………….....13 Changing Passwords…………………………………………………………………42Page Figure 1 Sample Application Features LED Indicators on the Front Panel Figure 2 LED Indicators and PortsPart Names and Functions Port/button Local Port Password Default setting No passwordLocal and Global Port Addresses Information from ISPEx. yourcompany.com For CATV dynamic modeFor Static Mode For DSL dynamic modePassword Service NamePage WAN Port CATV dynamic Moderequired for the internal network’s email and news Device Informationinsensitive. Note 1. Your ISP may ask you to input a certain domain name. 2. A Domain name is alsoPPPoE DSL dynamic Mode For example yourcompany.com. The Device InformationService Name Device Configuration For example yourcompany.com. The LAN PortDHCP Server Private Network253, the device will distribute IP Note If “Continuous IP address pollstarts” is set at 192.168.1.1 and the “Number of IP address in pool” isAdvanced Setup Management4. Block WAN Request Limit Management Change Administrator’s passwordVirtual Server Modify the Configuration PortBy Port Add ServerMethod By NamePacket Filters Reset will erase all previously entered device settingsPlease note that performing the Factory Static Router Default Gateway Destination Network/Host 1. Select “Static Route #1” or “Static Route #2”Example Application 2. Enter the settingsPage ALERT function Check E-MailEmail Account Dynamic DNS WAN IP Status Network StatusDisplays active Internet sessions through this device Sessions ListUsers List IP Remote/Port RemoteIdle Save Configuration Others Factory ResetLoad Configuration from File Firmware Upgrade 3. Check the box for Change Administrator’s Password Getting Started To use this GUI, you must have IE 4.01 or above preinstalledIcon FunctionDescription Management 3. Click on the tool bar to configure the selected deviceLAN Port SubNet mask DefaultADSL/Cable modem Obtain Configuration Automatically CATV Dynamic Mode IP AddressCATV dynamic Mode Figure 34 CATV Dynamic Mode PPPoE DSL dynamic Mode PPPoE Account Active Profile The maximum input is 52 alphanumeric characters case sensitive Device/Computer Static ModeAdapter Address It is necessary for some ISPs to identify the device by itsUpgrade WAN IP Factory ResetUser List Displays the current active usersRefresh Click this button to refresh the list Displays active Internet sessions through this device Session ListWhy Dynamic DNS? When Should I modify the MAC address for WAN/global port settings?What is DMZ? What is Dynamic DNS DDNS?What is a Wild card ? What is MX Mail Exchanger? And why MX?What is PPPoE Point-to-Point Protocol Over Ethernet ? Check the physical connectivity of the local network Cannot access the InternetHow do I know if I am using PPPoE? IP address conflictCheck the status of your H-BR49 Check the physical connectivity of the broadband deviceWINIPCFG DiagnosisCheck the logical connectivity from your computer to the Internet TCP/IP Network DiagnosisClick the More Info button to get detailed configuration information Figure 43 IP ConfigurationFigure 44 IP Configuration IPCONFIG PING.EXE3. Type ping 168.95.192.1 and click OK C\ P ING 168.95.192.1 -w Reply from 192.168.0.1 bytes=32 time=3ms TTL=100ISP Connectivity Checkup Internet Connectivity CheckupStandards Ports Cabling type Protocols Supported Management Appendix A SpecificationsLED indicators Input power specifications Physical Dimension Weight Agency and Regulatory Operating Temperature Operating HumidityAppendix B Supported Internet Applications Appendix C WAN PORT LINK STATUS PPPoE link status The IP address succeeds in setting up manually DHCP link statusStatic IP assignment link status “Static assigned”