Hawking Technology H-BR49 manual Change Administrator’s password, Limit Management

Change Administrator’s password:

1.Click the checkbox to enable this change.

2.Enter the new password.

3.Re-enter the new password for confirmation.

Limit Management:

1.Click the checkbox to enable this function.

2.Enter the network adapter MAC address for Station 1.

3.Enter the network adapter MAC address for Station 2. If you are only setting up one management station, leave the Station 2 MAC address with all F.

Below are coordinate results of the Block WAN Request and HTTP management for this device. Refer to this table for further Internet/system management.

V:Checked

O:Unchecked

Block WAN	Management	Coordinate Result
Request	Via Internet
V	O	WAN requests over TCP 113 (IDENT) and
		ICMP are rejected.
	(automatically)
		HTTP management is not allowed.
O	V	WAN requests over TCP 113 (IDENT) and
		ICMP are accepted.
		HTTP management is allowed.
O	O	WAN requests over TCP 113 (IDENT) and
		ICMP are accepted.
		HTTP managements is not allowed.