10.Remove and inspect the spark plug; refer to Servicing the Spark Plug. With the spark plug removed from the engine, pour 2 tablespoons of engine oil into the spark plug hole. Use the electric starter to crank the engine and distribute the oil inside the cylinder. Install the spark plug, but do not connect the wire to the spark plug.
11.Disconnect the negative battery cable. Clean the battery and battery terminals. Check the electrolyte level and charge it fully; refer to Servicing the Battery. Leave the negative battery cable disconnected from the battery during storage.
Important: The battery must be fully charged to prevent it from freezing and being damaged at temperatures below 32°F (0°C). A fully charged battery can be stored during the winter without recharging.
12.Check and tighten all bolts, nuts, and screws. Repair or replace any part that is worn or damaged.
13.Paint all scratched or bare metal surfaces with paint available from an Authorized Service Dealer.
14.Store the tractor in a clean, dry garage or storage area. Remove the ignition and reverse interlock keys from the tractor and keep them in a memorable place.
Cover the tractor to protect it and keep it clean.
43
