Hayter Mowers RT380H manual Cooling System Maintenance, Cleaning the Cooling System

Figure 42

1.Fill plug

5.Remove the fill plug and check the fluid level.

Note: The level should be a maximum of 1-1/4 inch (32 mm) below the top of the fill port (Figure 42). Add fluid if necessary.

6.Install the fill plug.

Cooling System

Maintenance

Cleaning the Cooling System

Service Interval: Every 100 hours

Use a dry brush to clean grass and accumulated debris from the engine daily.

Important: To prevent contaminating the fuel system, do not use water to clean the engine.

33