Sound Pressure, Sound Power, Vibration | Hayter Mowers RT380H

•Reduce the throttle setting during engine run-out and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

•Use only Hayter-approved attachments. The warranty may be voided if you use the tractor with unapproved attachments.

Maintenance and Storage

•Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

•Never store the equipment with fuel in the tank inside a building where fumes can reach an open flame or spark.

•Allow the engine to cool before storing in any enclosure.

•To reduce the fire hazard, keep the engine, silencer, battery compartment and fuel storage area free of grass, leaves, or excessive grease.

•Replace worn or damaged parts for safety.

•If the fuel tank has to be drained, this should be done outdoors.

•On multi-bladed machines, take care as rotating one blade can cause other blades to rotate.

•When machine is to be parked, stored or left unattended, lower the cutting means unless a positive mechanical lock is used.

Sound Pressure

This unit has a maximum sound pressure level at the operator’s ear of 89 dBA, based on measurements of identical machines per EN 836 and ISO 11201.

Sound Power

This unit has a guaranteed sound power level of 100 dBA, based on measurements of identical machines per ISO 11094.

Vibration

This unit does not exceed a hand/arm vibration level of

2.4m/s2, based on measurements of identical machines per EN 836 and EN 1033.

This unit does not exceed a whole body vibration level of 0.5 m/s2, based on measurements of identical machines per EN 836 and EN 1032.

5

Image 5

Hayter Mowers RT380H manual Sound Pressure, Sound Power, Vibration, Maintenance and Storage

Contents

With Recycling/Side Discharge Deck RT380H Tractor Introduction Contents Preparation SafetyTraining Mow only in daylight or in good artificial light Operation Maintenance and Storage Sound PowerSound Pressure Vibration Slope Chart 114-3236 Safety and Instructional Decals 93-6677 107-4922 Media and Additional Parts SetupLoose Parts Installing the Steering Wheel Installing the Front WheelsParts needed for this procedure No Parts Required Procedure Activating the Battery Installing the Seat Checking the Engine Oil Level Wait 5 to 10 minutes after filling the battery cells Checking the Safety Interlock System Installing the Anti-Scalp WheelsLubricating the Tractor Preparing the Cutter Deck Discharge Chute Checking the Hydro Neutral Position Controls Product OverviewChecking the Traction Control Pedal Petrol and Oil Using Stabilizer/ConditionerOperation Operating the Headlights Using the Parking BrakePositioning the Seat Engaging the Power Take Off PTO Setting the Height-of-CutOperating the Blade Control PTO Starting the Engine Understanding the Safety Interlock System Using the Safety Interlock SystemSetting the Tractor to Operate in Reverse Stopping the Engine Pushing the Tractor Manually Testing the Safety Interlock SystemTo Push the Tractor To Operate the Tractor Driving Forward or Backward Installing the Discharge CoverStopping the Tractor Side Discharge or Mulch Grass Operating Tips Recommended Maintenance Schedules Maintenance Servicing the Engine Oil Lubrication Engine MaintenanceGreasing and Lubricating the Tractor Changing the Oil Servicing the Air CleanerChanging the Oil Filter Removing the Foam and Paper Elements Cleaning the Foam and Paper Elements Installing the Foam and Paper ElementsServicing the Spark Plug Removing the Spark Plug Installing the Spark Plug Fuel System MaintenanceDraining the Fuel Tank Checking the Spark Plug Servicing the Battery Electrical System MaintenanceRemoving the Battery Replacing the Fuel Filter Checking the Electrolyte Level Installing the BatteryAdding Water to the Battery Servicing the Fuse Charging the BatteryServicing the Headlights Removing the Bulb Installing the Bulb Drive System MaintenanceServicing the Transaxle Fluid Checking the Fluid Level Cleaning the Cooling System Cooling System Maintenance Adjusting the Parking Brake Brake MaintenanceServicing the Parking Brake Checking the Parking Brake Servicing the Blades Belt Maintenance Cutter Deck MaintenanceReplacing the Blade Drive Belt Sharpening the Blades Installing the BladesRemoving the Cutter Deck Idler spring Idler arm Eye-bolt Installing the Cutter Deck Leveling the Cutter Deck from Side-to-Side Adjusting the Front-to-Rear Blade Slope Washing the Underside of the Cutter Deck Cleaning Storage Cover the tractor to protect it and keep it clean Problem Possible Cause Corrective Action Troubleshooting Tractor does not drive Schematics Page Page 1st Year 12 months Page Limited Warranty Date of Sale Your Local Dealer