Healthrider HMTL57808 manual Assembly

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-
mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.		and your own Phillips screwdriver		,
Assembly requires the included hex keys			.
adjustable wrench	, scissors	, and needlenose pliers

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

M4.2 Star	M8 Star		M10 Star	Bolt Spacer (79)–4
Washer (70)–2						Base Foot Spacer
	Washer (10)–4	Washer (8)–4
						(104)–2
M4.2 x 19mm	M4.2 x 25mm		#10 x 1" Tek		M4 x 20mm	M8 x 25mm Bolt (6)–4
Screw (1)–4	Tek Screw (2)–4		Screw (76)–2		Screw (3)–2
			M10 x 96mm Bolt (5)–4

6