5.The grate is located in the lower cav- ity. Remove the screw holding the grate in place and discard the screw.
6.Position the grate into the cutout in the refractory. Hook the grate into po- sition using the tabs on the bottom of the grate. Make sure the grate is pulled forward on the refractory (see Figure 43).
7.Cut shrink wrap and remove from around the log assembly.
!WARNING: REMOVE ALL PACKAGING FROM LOGS.
8.Install embers. See ember placement instructions for details.
!WARNING: USE DIME SIZE PIECES ONLY. DO NOT
COVER PORTS.
9.Carefully position the log set in place into the fireplace. Pull the log set for- ward until the log set contacts the log placement tabs. Center the log set in the firebox side to side (see Figure 44). (Grate removed for viewing.)
Figure 43
Log Placement Tabs
Figure 44
Shutter Settings
| NG | LP |
Burner | 1/4” | 5/8” |
|
|
|
Hearth & Home Technologies • 6000BE, | 33 |
