![](/images/new-backgrounds/1303942/30394255x1.webp)
North Star
EPA Certified Fireplace
6. Care and Cleaning of Glass | 8. Glass Replacement |
Your fireplace is equipped with ceramic super heat- resistant glass, which can only be broken by impact or misuse. Do not slam doors or impact the glass. When closing doors, make sure that logs do not protrude against the glass. Clean glass with a nonabrasive glass cleaner, such as Windex. Abrasive cleaners may scratch and cause glass to crack. Inspect glass regularly. If you find a crack or break, immediately put the fire out and return the door to your dealer for replacement of glass before further use.
IMPORTANT!
REMOVE ALL LABELS FROM GLASS BEFORE LIGHTING THE FIRST FIRE IN YOUR FIREPLACE.
IMPORTANT!
Replace with 5mm ceramic glass only
7. Care and Cleaning of Plated Surfaces
Clean 24 karat
CAUTION:
Do not use polishes with abrasives as it will scratch
the surface.
WARNING!
When the appliance is equipped with a 24 karat
1.Ensure that the fire is out and the appliance is cool to the touch.
2.Protect a table or counter top with padding or towels.
3.Remove door with broken glass from the appliance by lifting door up and off of the hinges.
4.Lay door face down on a table or counter making sure handle and handle attachment knob hang over the edge of the table top so door lays flat, on a soft surface.
5.Remove the screws from each glass tab (5 on each door) using a #2 Phillips Head screwdriver. HINT: Soak screws in penetrating oil for easy removal.
6.Remove the glass.
7.Use only 5mm ceramic Glass, Part
8.Position the glass with edges evenly overlapping the opening in the front door.
9.Replace the glass tabs. Be careful not to cross thread the screws.
10.Tighten each tab just a few turns until each is secured. Then continue to tighten each tab alternately, a few turns at a time, until the glass panel is tightened snugly, but not over tightened.
11.Replace the door on the appliance.
12.After the first burn, recheck the tighness of the screws.
28 |