Safety Alert Key:
•DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.
•WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
•CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
•NOTICE: Used to address practices not related to personal injury.
Table of Contents
A. | Congratulations | 2 |
B. | Warranty | 5 |
1 Listing and Code Approvals
A. | Appliance Certification | 7 |
B. | Tempered Glass Specifications | 7 |
C. | BTU Specifications | 7 |
D. | High Altitude Installations | 7 |
E. | 7 | |
F. | Combustible Materials Specification | 7 |
G. | Electrical Codes | 7 |
H. | Requirements for |
|
| the Commonwealth of Massachusetts | 8 |
User Guide
2 Operating Instructions
A. | Gas Fireplace Safety | 9 |
B. | Your Fireplace | 9 |
C. | Fan Kit | 10 |
D. | Clear Space | 10 |
E. | Fixed Glass Assembly | 10 |
F.Remote Controls, Wall Controls and
| Wall Switches | 10 |
G. | Before Lighting Fireplace | 10 |
H. | Lighting Instructions (IPI) | 11 |
I. | Lighting Instructions (Standing Pilot) | 12 |
J. | After Fireplace is Lit | 13 |
K. | Frequently Asked Questions | 13 |
3 Maintenance and Service
A. | Maintenance | 14 |
B. | Maintenance | 15 |
Installer Guide
4 Getting Started
A. | Typical Appliance System | 17 |
B. | Design and Installation Considerations | 18 |
C. Tools and Supplies Needed | 18 | |
D. Inspect Appliance and Components | 18 | |
5 Framing and Clearances
A. | Selecting Appliance Location | 19 |
B. | Constructing the Appliance Chase | 20 |
C. | Clearances | 20 |
D. | Mantel and Wall Projections | 21 |
6 Termination Locations
A. Vent Termination Minimum Clearances | 22 |
7 Vent Information and Diagrams
A. | Approved Pipe | 24 |
B. | Vent Table Key | 24 |
C. | Use of Elbows | 24 |
D. | Measuring Standards | 24 |
E. | Vent Diagrams | 25 |
8 Vent Clearances and Framing
A. | Pipe Clearances to Combustibles | 30 |
B. | Wall Penetration Framing | 30 |
C. | Install the Ceiling Firestop | 31 |
D. | Install Attic Insulation Shield | 32 |
9 Appliance Preparation
A. Securing and Leveling the Appliance | 33 |
10 Installing SLP Vent Pipe
A. | Assemble Vent Sections | 34 |
B. | Assemble Slip Sections | 34 |
C. | Securing the Vent Sections | 35 |
D. | Disassemble Vent Sections | 35 |
E. | Installing Metal Roof Flashing | 36 |
F. | Install | 37 |
G. | Installing Vertical Termination Cap | 38 |
H. | Assemble and Install Storm Collar | 38 |
I.Install Heat Shields and
| Horizontal Termination Cap | 39 |
11 Gas Information |
| |
A. | Fuel Conversion | 41 |
B. | Gas Pressure | 41 |
C. | Gas Connection | 41 |
D. | High Altitude Installations | 41 |
12 Electrical Information |
| |
A. | Wiring Requirements | 42 |
B. | Standing Pilot Ignition System Wiring | 42 |
C. | Intellifire Ignition System Wiring | 42 |
D. | Optional Accessories Requirements | 42 |
E. | Electrical Service and Repair | 43 |
F. | Junction Box Installation | 44 |
G. | Wall Switch Installation for Fan (Optional) | 44 |
13 Finishing |
| |
A. | Mantel and Wall Projections | 45 |
B. | Facing Material | 45 |
Heatilator • Eclipse • | 3 |
