4 | Getting Started | Installer Guide |
|
|
A. Typical Appliance System
NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
Noncombustible roof flashing maintains minimum clearance around pipe (SECTION 10)
Vent Pipe (SECTIONS 7, 8, 10)
Ceiling Firestop on floor of attic (SECTION 8)
Vertical Termination Cap
(SECTION 10)
Storm Collar (SECTION 10)
Vent pipe penetrates roof, preferably without affecting roof rafters
(SECTION 8)
Attic insulation shield (not shown) must be used here to keep insulation away from vent pipe if attic is insulated. (SECTION 8)
Framing/Header | Framing Headed off |
(SECTION 5) | in Ceiling Joists |
| (SECTION 8) |
Optional
Wall Switch
Mantel & Mantel Leg
(SECTION 13)
Surround
Hearth Extension (not required)
Gas Line (SECTION 11)
Figure 4.1 Typical System
Heatilator • Eclipse • | 17 |
