E. Wall Switch Installation for Fan (Optional)
If the box is being wired to a wall mounted switch for use with a fan (See Figure 7.4):
•The power supply for the appliance must be brought into a switch box.
•The power can then be supplied from the switch box to the appliance using a minimum of
•At the switch box connect the black (hot) wire and red (switch leg) wire to the wall switch as shown.
•At the appliance connect the black (hot), white (neutral) and green (ground) wires to the junction box as shown.
•Add a 1/4 inch insulated female connector to the red (switch leg) wire, route it through the knockout in the face of the junction box, and connect to the top fan switch connector (1/4 inch male) as shown.
| SWITCH |
MINIMUM |
|
WITH GROUND |
|
Red | Black |
Black | |
White | White |
Green | Green |
JUNCTION BOX |
|
Red Black White Green |
|
| POWER |
| SUPPLY WIRES |
| SWITCH BOX |
Red |
|
Figure 7.4 Junction Box Wired to Wall Switch |
|
32 | Heat & Glo • Paloma • |
