H. Installing the Baffle
The baffle is shipped wrapped, inside the firebox. Install the baffle with the embedded “T” side up, place it on top of the brackets on the inside of the firebox, ensuring back edge of baffle makes contact with the back of the firebox.
Figure 8.17
I. Positioning the Logs
Remove the ignitor shield from the pilot assembly prior to installing the logs. (Figure 8.18).
PILOT ASSEMBLY
IGNITER SHIELD
Figure 8.18
While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.
Note: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance.
Place log #1 into the cradle in the burner. Lean the log back towards right corner of firebox.
Figure 8.19
Locate log #2 over the pin in log #1 and into notch in log #1. Lean the log back toward the left corner of the fire- box.
PIN 
Figure 8.20
Heat & Glo • Paloma • | 37 |
