Hearth and Home Technologies PALOMA-BZ Leveling and Lagging Down the Appliance, Accessories

C. Leveling and Lagging Down the Appliance

Lagging the appliance down is REQUIRED.

WARNING

Fire Risk.

Odor Risk.

Tipping Risk

•Install gas stove on a stable, level platform/ floor strong enough to support gas stove without tipping.

•USE wood flooring, ceramic tile, brick hearth or high pressure laminate flooring applied

directly over the sub-flooring material.

Level	Securing holes	Level
screw	Lag bolt hole	screw

Figure 8.4

Figure 8.5

After unbolting the appliance from the pallet, insert two 1/4 20 x 1/1/2 counterscrews.

Using pliers, adjust the counterscrews to level the appli- ance.

LAGGING

CLEARANCE

HOLE

Figure 8.6

Place the lag bolt from the component bag in the center hole in the bottom plate (lagging clearance hole). The appliance must be lagged down securely to prevent tip- ping forward.

Figure 8.7

Using pliers, adjust the counterscrews to level the appli- ance.

D. Accessories

Install approved accessories per instructions included with accessories. See Service Parts List for appropriate accessories. Refer to Section 16.

WARNING

Shock or fire risk.

Use ONLY optional accessories approved for this appliance.

•Using non-listed accessories voids warranty.

•Using non-listed accessories may result in a safety hazard.

•Only Hearth & Home Technologies approved

accessories may be used safely.

34 Heat & Glo • Paloma • 7031-220 Rev. P • 10/08