5 Framing and Clearances
A. Selecting Appliance Location
When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies.
NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY. Illustrations/diagrams are not drawn to scale. Actual installation may vary due to individual design preference.
G
1/2 IN.
A
D
H 
A 
B C
TOP VENT
ONE 90º ELBOW
REAR VENT,
HORIZONTAL TERMINATION,
TWO ELBOWS
B
D
B
ALCOVE
INSTALLATION E
| REAR VENT, |
| |
REAR VENT, | ONE ELBOW |
| |
B |
| ||
NO ELBOWS | D | ||
| |||
B |
|
F
D
| A | B | C | D | E | F | G | H |
Inches | 51 | 42 | 72 | See Section D. | 22 | 8 | ||
Millimeters | 1295 | 1067 | 1829 | 1438 | Mantel Projections | 559 | 451 | 203 |
Figure 5.1 Appliance Locations
18 | Heat & Glo • |
