Heat & Glo LifeStyle 6000GLX-IPI-S/-R B. Vent Components Diagrams continued, DVP-TRAP1, DVP-TRAP2

B. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8in.

(203 mm)

Heat

Shield

15-1/8 in.
(384 mm)
						Term Cap	Minimum	Maximum
							Effective Length	Effective Length
			12 in.		Max
							3-1/8 in.	4-5/8 in.
		(305 mm)		Effective		Trap1
							79 mm	117 mm
		DVP-TRAP		Length
						Trap2	5-3/8 in.	9-3/8 in.
	Horizontal Termination Cap
							137 mm	238 mm

DVP-TRAP1 DVP-TRAP2

DVP-TRAPK1 DVP-TRAPK2

DVP-HPC1 DVP-HPC2

Figure 16.3 DVP vent components

62 Heat & Glo • 6000GLX-IPI-S/-R, 6000GLX-IPILP-S/-R • 2101-900 Rev. Q • 11/08