C.Glass Refractory, Base Pan, Burner and Valve Assembly Removal
It may become necessary to remove the glass panels, base pan, burner and valve assembly. This task should be performed by a qualified service technician.
1.Remove the media.
2.Remove the side glass panel retainers. See Figure 3.2. Slide the side glass panels out of the appliance as shown in Figure 3.3.
3.Remove the rear glass panel retainer, shown in Figure 3.2, and lift the rear glass panel out of the appliance.
REAR PANEL RETAINER |
SIDE PANEL RETAINERS |
Figure 3.2 Remove Glass Panel Retainers
4.Remove the base pan by removing the screws circled in Figure 3.4.
5.Remove the burner assembly by removing the two screws as shown in Figure 3.5. To disengage the burner from the orifice, slide the burner to the right and lift it out.
6.See Figure 3.6 for valve assembly removal.
APPEARANCE |
MAY VARY |
Figure 3.4 Base Pan Removal
|
| Figure 3.5 Burner Assembly Removal |
Figure 3.3 Glass Panel Removal |
| |
16 | Heat & Glo • |