Heat & Glo LifeStyle 8000CMOD-IPI Framing and Clearances, A. Selecting Appliance Location, 6000

5 Framing and Clearances

A. Selecting Appliance Location

When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1).

WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.

Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies.

NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY. Illustrations/diagrams are not drawn to scale. Actual installation may vary due to individual design preference.

NOTE: THE REAR STANDOFF MAY NEED TO BE REMOVED WHEN VENTING AT 45º

A

F

1/2 IN.

A	BC
	TOP VENT
	ONE 90º ELBOW

B

ALCOVE INSTALLATION D

B

E

		A	B	C	D	E	F
6000	in.	51	42	72	See Section D.	22	17-3/4
	mm	1295	1067	1829	Mantel Projections	559	451
8000	in.	55-7/8	49	79	See Section D.	22	19-3/4
	mm	1419	1245	2007	Mantel Projections	559	502

Figure 5.1 Appliance Locations

20 Heat & Glo • 6000CMOD-IPI, 8000CMOD-IPI • 2241-900 Rev. H • 5/12