F. Media Placement
WARNING! Risk of Explosion! Follow media placement instructions. Improperly placed media interfere with proper burner operation.Fireplace will not function properly. Delayed ignition may occur.
WARNING! Choking Hazard! Keep media out of reach of children.
•DO NOT place media in pilot opening.
•DO NOT place media in a position that it may fall into the pilot opening.
•DO NOT use any media other than the media supplied with this fireplace or listed in Service Parts Section in this manual.
•DO NOT use more than 14 lb. of media per 8000CMOD- IPI or 12 lb. per
1.Place media evenly on the base pan. Figure 14.9 shows properly placed media.
2.The media can only be placed in the shaded areas as shown in Figure 14.7 and Figure 14.8.
3.Do not apply media over the pilot opening. See Figure 14.7 and Figure 14.8.
4.The rock fixture assembly is factory installed in the appliance. See Figure 14.4 and Figure 14.5.
5.After the media is properly installed, carefully remove the rock fixture assembly. Do not allow any media to fall into the opening. See Figure 14.6. Store the rock fixture assembly under the appliance for future use.
Figure 14.4 Rock Fixture Installed
Figure 14.5 Rock Fixture Assembly Installed
THIS JIG MUST BE USED FOR STONE PLACEMENT
•REMOVE BEFORE BURNING
•DO NOT DISCARD
REMOVE SCREW
Figure 14.6 Remove Rock Fixture Assembly
Heat & Glo • | 53 |
