Heat & Glo LifeStyle EXCLAIM-36T-C, EXCLAIM-36H-C Installing an ST475 Square Termination Cap

•For installations utilizing an ST475 Square Termination Cap the last chimney section must not be more than 4-1/2 in. (114 mm) below the chase top. See Figure 6.7.

		Flashing Collar
Cap Standoff			2 in. (51 mm) min.
					4-1/2 in.
1-1/2 in.
(38 mm) min.				(114 mm)
overlap	Top of Pipe					max.

Figure 6.7 Installing an ST475 Square Termination Cap

•For chase installations you can use a TR444 Round Termination Cap, a TR442 Round Telescoping Termination Cap, or an ST475 Square Termination Cap.

•Install termination caps following instructions provided with them.

Heat & Glo • EXCLAIM-36C Woodburning Fireplace • 4013-093 Rev G • 08/06 23