C. Typical Fireplace System
The Heat & Glo fireplace system consists of the following:
•Fireplace/integral grate/refractory/outside air system
•Chimney termination cap
•Chimney system
•Hearth extension
Optional components include:
•Glass doors
•Chimney air kit (required in Canada)
Additional lateral
support for chimneyTermination cap above roof (or enclosed
in chase) if needed
| ||
roof flashing maintains | Storm Collar | |
minimum clearance | ||
around chimney |
| |
| Chimney penetrates roof | |
| preferably without affecting | |
Support straps | roof rafters | |
| ||
on rafter supports |
| |
chimney (not shown) | Offset/Return (with hanger straps) | |
| ||
| Attic insulation shield may | |
Ceiling firestop | be used here to keep insulation | |
away from chimney | ||
on floor of attic | ||
| ||
Chimney system | Framing headed off | |
| ||
Combustible | in ceiling joists | |
| ||
framing/header | Enclosed space above | |
on top of | ||
and around fireplace | ||
| ||
standoffs |
| |
(spacers) | Mantel and surround | |
| Decorative facing | |
| and trim |
Hearth extension
Outside combustion air
Protective metal hearth strip(s)
Figure 2.2 Typical Fireplace System
Heat & Glo • | 7 |
