Heat & Glo LifeStyle EXCLAIM-36T-C Framing and Clearances, Selecting Fireplace Location

3	Framing and Clearances
		WARNING	Note:
	Fire Risk		• Illustrations and photos reflect typical installations
	Provide adequate clearances.• Around air		and are FOR DESIGN PURPOSES ONLY.
			• Illustrations/diagrams are not drawn to scale.
	openings
	•	To combustibles	• Actual installation/appearance may vary due to
	•	For service access.	individual design preference.
	Locate fireplace away from traffic areas.		• Hearth & Home Technologies reserves the right to
			alter its products.
A. Selecting Fireplace Location			Locating the fireplace in a basement, near frequently opened
Several options are available to you when choosing a loca-			doors, central heat outlets or returns, or other locations of

tion for your fireplace. This fireplace may be used as a room	considerable air movement can affect the performance and
	cause intermittent smoke spillage from the front of the fire-
divider, installed along a wall, across a corner or used in an
	place. Consideration should be given to these factors before
exterior chase. See Figure 3.1.
	deciding on a location. See Sections 2 and 10.

19-3/8 in.	60-1/8 in.		28 in.
	(1527 mm)		(711 mm)
(492 mm)
		A
		In an exterior chase	12 in.
	Across a		(305 mm)
	corner	or projecting into a
	45-1/2 in.	garage
42-1/2 in.	(1156 mm)
	85 in. (2159 mm)
(1080 mm)

28 in. (711 mm)

Note: 1 in. (25 mm) min. distance from fireplace to combustible materials.

Note: In addition to these framing dimensions, also reference the following sections:

•Clearances (Section 3.B.)

•Mantel Projections (Section 8.C)

•Fireplace Dimensions (Section 12.A.)

As a room divider A

48 in. (1219 mm)

Along a wall		5/8 in. (16 mm)
	A	all configurations

28 in. (711 mm)

EXCLAIM-36		A
With Outside	in.	49-1/2
Air	mm	1257
Without	in.	45-1/2
Outside Air	mm	1156

¨

Figure 3.1 Fireplace Locations

Heat & Glo • EXCLAIM-36C Woodburning Fireplace • 4013-093 Rev G • 08/06 9