Heat & Glo LifeStyle SLR (COSMO) Top Vent Horizontal Termination Venting with 2 elbows

1. Top Vent - Horizontal Termination - (continued)

Top Vent - Horizontal Termination

Venting with 2 elbows

	V Minimum		H1 + H2 MAXIMUM
				SLR
	90° Elbow		1 ft.		305 mm
1 ft.		305 mm	2 ft.		610 mm
2 ft.		610 mm	4 ft.		1.2 m
3 ft.		914 mm	6 ft.		1.8 m
4 ft.		1.2 m	14 ft.		4.3 m

H + H1 MAX. =14 ft. (4.3 m)

V + H + H1 MAX. = 40 ft. (12.2 m)

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 7.3).

Note: The SLP-HRC-SS and SLP-HRC-ZC-SS termination caps are not approved for use with propane (LP) fuel.

H2	V1
	H1

INSTALLED

HORIZONTALLY

Figure 7.5

24 Heat & Glo • SLR • 2143-900 Rev. B • 7/08