Heat & Glo LifeStyle SLR (COSMO) owner manual Inside Fit Method Tonic Decorative Front Only

Non-Combustible Finish Materials

0 Inches to 4 Inches Thick Inside Fit Method

Note: The Inside Fit application is only approved for the Tonic decorative front.

The Tonic decorative front is approved for inside fit ap- plications. Non-combustible finishing materials up to 4 inches thick can be installed around the Tonic front (left, right, top, and bottom). The inside fit method requires an additional 4 in. of 1/2 in. thick non-combustible building material (not supplied with fireplace) to be installed on the left and right sides flush with the factory installed non- combustible board. See Figure 13.15.

WARNING! Risk of Fire! The Martini decorative Front is not approved for inside fit installations. DO NOT install Martini decorative front using an inside fit application. Resulting elevated \temperatures may cause overheating and fire.

For the Tonic decorative front inside fit applications, the decorative front must be installed tightly to the finishing flanges and must not overlap any finish material.

Ensure that no non-combustible finish materials are in- stalled within 3/4 in. of the fireplace opening. The 3/4 in. spacing is required to provide clearance for removing and installing the Tonic decorative front. See Figure 13.16.

FACTORY-INSTALLED

NON-COMBUSTIBLE

BOARD

0-4 IN.

17-1/2 IN. APPLIANCE OPENING (HEIGHT)

0- 4 IN.

DRYWALL OR EQUIVALENT (1/2 IN.)

	Top Joint
Non-Combustible	0 in.
Finishing Material
4 in. MINIMUM

NON-COMBUSTIBLESide

BOARDJoint

0 in.		Non-Combustible
		Finishing Material
	0 in.	4 in. MINIMUM

Bottom

Joint

Figure 13.15 Noncombustible Surface Finishing Material 0-4

Inches Thick-Inside Fit Method (Tonic Decorative

Front Only)

Non-Combustible Finish Material 0-4 Inches Thick

3/4 IN. 3/4 IN.

Bottom

Joint

Figure 13.16 Noncombustible Surface Finishing Material 0-4 Inch Thick-Inside Fit Method (Tonic Decorative Front Only)

Figure 13.14 Inside Fit Method (Tonic Decorative Front Only)

52 Heat & Glo • SLR • 2143-900 Rev. B • 7/08