Heat Controller HEV/H Electrical - Line Voltage, ѥ WARNING! ѥ, ѥ CAUTION! ѥ, Electrical Data

Installation, Operation & Maintenance HEV/H SERIES Heat Controller, Inc.

ELECTRICAL - LINE VOLTAGE

ѥ WARNING! ѥ

WARNING! To avoid possible injury or death due to electrical shock, open the power supply disconnect switch and secure it in an open position during installation.

ѥ CAUTION! ѥ

CAUTION! Use only copper conductors for field installed electrical wiring. Unit terminals are not designed to accept other types of conductors.

Electrical - Line Voltage

All field installed wiring, including electrical ground, must comply with the National Electrical Code as well as all applicable local codes. Refer to the unit electrical data for fuse sizes. Consult wiring diagram for field connections that must be made by the installing (or electrical) contractor.

All final electrical connections must be made with a length of flexible conduit to minimize vibration and sound transmission to the building.

General Line Voltage Wiring

Be sure the available power is the same voltage and phase shown on the unit serial plate. Line and low voltage wiring must be done in accordance with local codes or the National Electric Code, whichever is applicable.

Electrical Data -

				Compressor			HWG	Ext	Fan	Total	Min	Max
HE	Volt		Voltage					Loop
		Rated Voltage					Pump		Motor	Unit	Circuit	Fuse/
Model	Code		Min/Max					Pump
				RLA	LRA	Qty	FLA		FLA	FLA	Amp	HACR
								FLA
024	1	208-230/60/1	197/252	11.7	58.3	1	0.5	4.0	3.9	20.1	23.0	30
030	1	208-230/60/1	197/252	13.1	73.0	1	0.5	4.0	3.9	21.5	24.7	35
036	1	208-230/60/1	197/252	15.3	83.0	1	0.5	4.0	3.9	23.7	27.5	40
042	1	208-230/60/1	197/252	17.9	96.0	1	0.5	4.0	5.2	27.6	32.0	45
048	1	208-230/60/1	197/252	21.2	104.0	1	0.5	4.0	5.2	30.9	36.2	50
060	1	208-230/60/1	197/252	27.1	152.9	1	0.5	4.0	6.9	38.5	45.2	70

HACR circuit break in U.S. only All fuses Class RK-5

Wire length based on one way measurement with 2% voltage drop Wire sizes based on 140°F (60°C) copper conductor

22