Installation, Operation & Maintenance | HEV/H SERIES | Heat Controller, Inc. |
|
|
|
UNIT COMMISSIONING AND OPERATING CONDITIONS
Operating Limits
Environment – Units are designed for indoor installation only. Never install units in areas subject to freezing or where humidity levels could cause cabinet condensation (such as unconditioned spaces subject to 100% outside air).
Power Supply – Voltage utilization shall comply with AHRI standard 110, voltage range A.
Determination of operating limits is dependent primarily upon three factors: 1) return air temperature. 2) water temperature, and 3) ambient temperature. When any one of these factors is at minimum or maximum levels, the other two factors should be at normal levels to insure proper unit operation. Extreme variations in temperature and humidity and/or corrosive water or air will adversely affect unit performance, reliability, and service life. Consult Table 9a for operating limits.
Table 9a: Building Operating Limits
Operating Limits | Unit | |||
Cooling | Heating | |||
|
| |||
Air Limits |
|
| ||
Min. ambient air, DB | 45ºF [7ºC] | 39ºF [4ºC] | ||
Rated ambient air, DB | 80.6ºF [27ºC] | 68ºF [20ºC] | ||
Max. ambient air, DB | 130ºF [54ºC] | 85ºF [29ºC] | ||
Min. entering air, DB/WB | 65/45ºF [18/7ºC] | 50ºF [10ºC] | ||
|
| 70/50ºF Reheat |
| |
Rated entering air, DB/WB | 80.6/66.2ºF [27/19ºC] | 68ºF [20ºC] | ||
Max. entering air, DB/WB | 100/75ºF [38/24ºC] | 80ºF [27ºC] | ||
Water Limits |
|
|
| |
Min. entering water | 20ºF | 20ºF | ||
Normal entering water | ||||
Max. entering water |
| 120ºF [49ºC] | 120ºF [49ºC] | |
Normal Water Flow | 1.5 to 3.0 gpm / ton | |||
[1.6 to 3.2 l/m per kW] | ||||
|
|
Rev.: 4 June, 2012
Commissioning Conditions
Consult Table 9b for commissioning conditions. Starting conditions vary depending upon model and are based upon the following notes:
Notes:
1.Conditions in Table 9b are not normal or continuous operating conditions. Minimum/maximum limits are
2.Voltage utilization complies with AHRI Standard 110, voltage range B.
Table 9b: Building Commissioning Limits
Commissioning Limits | Unit |
| |||
Cooling | Heating | ||||
|
| ||||
Air Limits |
|
|
| ||
Min. ambient air, DB | 45ºF [7ºC] | 39ºF [4ºC] | |||
Rated ambient air, DB | 80.6ºF [27ºC] | 68ºF [20ºC] | |||
Max. ambient air, DB | 130ºF [54ºC] | 85ºF [29ºC] | |||
Min. entering air, DB/WB | 60ºF [16ºC] | 40ºF [4.5ºC] | |||
Rated entering air, DB/WB | 80.6/66.2ºF [27/19ºC] | 68ºF [20ºC] | |||
Max. entering air, DB/WB | 110/83ºF [43/28ºC] | 80ºF [27ºC] | |||
Water Limits |
|
|
|
| |
Min. entering water | 20ºF | 20ºF | |||
Normal entering water | |||||
Max. entering water |
| 120ºF [49ºC] | 120ºF [49ºC] |
| |
Normal Water Flow | 1.5 to 3.0 gpm / ton |
| |||
[1.6 to 3.2 l/m per kW] | |||||
|
| ||||
|
|
| Rev.: 4 June, 2012 |
32