Henny Penny BCC/BCR-140, BFR/BCR-350, BCC/BCR-175 manual Cleaning, Daily, Monthly BCC-140 Only

Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350

3-5. CLEANING	Daily:
	1.	Remove all electrical power supplied to the unit by turning off
		the wall circuit breaker.
	2.	Remove all product from the unit.
	3.	Remove the racks and pans from the unit and clean with
		soap and water at a sink.
	4.	Clean all surfaces with a soft cloth, soap and water. DO
		NOT USE ABRASIVE CLEANSERS.
		DO NOT use abrasives, such a steel wool, or abrasive
		cleaners, such as, chlorine, bromine, iodine, or ammonia
		chemicals to clean the unit. These will deteriorate the
		stainless steel and greatly reduce the life of the unit.
	5.	Clean around the electronic controls and the door seal with
		a soft, damp cloth.
		DO NOT use large quantities of water, or a spray hose to
		clean the unit. Damage to the components could result.
	6.	Reconnect the electrical power to the unit and unit is now
		ready for operation.
	Monthly: BCC-140 Only
	At least once a month the air condenser needs to be cleaned of
	dust or obstructions for the unit to run effeciently and to reduce
	energy use of the unit.
	1.	Remove all electrical power supplied to the unit by unplug-
		ging the power cord from the wall, or by turning off the
		wall circuit breaker.
	2.	Using a flathead screwdriver, remove the screws from the
		front panel of the unit. Pull panel down and press in on the

side of the panel to release the tabs, and remove the panel from the unit.

300 3-8