Menu System

Menu System Menu System

Menu System

The CDR-882 has been designed to enable most of its basic functions and features to be actioned from dedicated front panel controls, without recourse to the display-based menu system. However, numerous additional settings and features are available from the system’s submenus.

The menu system follows a conventional “tree” structure, with various submenus being available from the “top” level of the menu “tree”.

Note that several of the CDR-882’s front panel buttons are inoperative while the unit is in menu mode. These are:

TEXT

DISPLAY

DISC COPY

PROGRAM

FINALIZE

ERASE

TRACK ID AUTO/MAN

SYNC REC

All other front panel controls remain operative in menu mode.

Menu Navigation

The menu system is entered by pressing the front panel MENU button [16]. The display changes to show the submenu selected. If the menu system has not been previously accessed since the unit’s last power-down, the first submenu, AUDIO is selected; otherwise the menu tree is “entered” at the last selected location.

The name of the submenu is highlighted; alternative submenus may now be selected by rotating the AMS control. Pressing ENTER (the AMS knob) selects the one required. The highlight then moves to the name of the setting or parameter for adjustment. A further press selects the parameter value itself, and rotating the AMS knob alters the value. In most cases, the displayed value flashes when the value is changed to indicate that it differs from the currently set value. Pressing ENTER at this point sets the new value, which is now displayed steadily. The CDR-882 stores all menu settings in non-volatile memory (unless otherwise stated below), thus they retain their values when the unit is powered off.

Note that there is only one “level” of parameters within each submenu.

MENU may be pressed at any time to return “back up” the menu tree, thus from parameter adjustment level, three presses are required to exit the menu system and return the display to normal operation.

NOTE: Menu navigation may also be performed from the remote control handset. The four buttons in the MENU/DIGITAL RECORD LEVEL area of the handset are used as follows:

The ON/OFF button is equivalent to the front panel MENU button

The ENTER button is equivalent to the press function of the AMS control

The + and buttons are equivalent to rotating the AMS control clockwise and anticlockwise respectively

CDR-882 User Manual Version 1.0

www.hhb.co.uk

27

Page 28
Image 28
HHB comm CDR-882 user manual Menu System, Menu Navigation