HHB comm CDR-882 General Submenu, Firmware Submenu, Timer, Eject Block, CDR882 Firmware Version

Menu System

General Submenu

The General submenu has two settings available for adjustment.

Timer

The CDR-882 has a Timer function which, when enabled, causes the CDR-882 to enter PLAY mode when the power is applied. Thus, by leaving the (mechanically-latching) power switch ON, the CDR-882 can be used to start playing a pre-loaded disc (or discs) when external power is applied via a time-controlled switch of some description.

The submenu option can simply be set to On or Off. The factory default setting is Off.

With the Timer function enabled, the CDR-882 first goes through its usual power-up diagnostic routines when power is applied. The drive containing an audio disc then enters PLAY mode; if both drives have discs, that in Drive 1 will be played. The CDR-882 also restores its MODE setting at the last power- down - i.e. Single, DualBurn or DiscSpan. Thus if DiscSpan mode is set, discs in the two drives will play in sequence.

Eject Block

The EJECT function is disabled if the selected drive is in either RECORD or RECORD PAUSE mode, to prevent inadvertent disc ejection and consequent recording abort. It is possible to additionally disable EJECT from all modes other than STOP, thereby guarding against the possibility of a disc being ejected while it is playing.

The submenu option can simply be set to On or Off. With the option set to Off, EJECT is only disabled in RECORD and RECORD PAUSE modes. When On, the selected drive must be in STOP mode for the EJECT function to work. The factory default setting is Off.

Firmware Submenu

The Firmware submenu displays the version numbers of the various firmware files within the CDR-882. The user need not concern him/herself with these, but they may be useful to HHB’s Technical Support engineers should a problem arise with the unit.

No adjustments are available within this submenu.

CDR882 Firmware Version

Displays the version number of the CDR-882’s main operating system, and date.

Drive 1 Firmware Version

Displays the version number of Drive 1’s internal firmware.

Drive 2 Firmware Version

Displays the version number of Drive 2’s internal firmware.

CPLD Firmware Version

Displays the version number of the CDR-882’s Complex Programmable Logic Device.

CDR-882 User Manual Version 1.0 www.hhb.co.uk 37