
Menu System
Example
An example will illustrate the method of navigation. Suppose we want to adjust the sensitivity of audio threshold detection. (This determines the level above which the audio input signal must rise for synchronous recording to start and below which it must drop for a new track ID to be written – assuming the option is selected otherwise). We will assume this is the first time the menu system has been accessed since the last
Audio threshold adjustment is made from within the RECORD submenu.
•From the normal operating mode, press MENU. The display changes to the entry point of the first submenu,
AUDIO
•Rotate the AMS control clockwise to show the other submenus until RECORD is displayed (highlighted). Press ENTER to select it
•Rotate the AMS control clockwise until the required parameter, Audio Threshold, is displayed (highlighted). Press ENTER to select it
•The AMS control may now be used to change the Audio Threshold level from
•Press ENTER again to select the new value
•Press MENU once to select a different parameter for adjustment within the RECORD submenu, twice to select a different submenu or three times to exit the menu system altogether
The Submenus
The
Submenu | Permits adjustment of |
|
|
AUDIO | Input levels, fade times, input and output dither and |
| monitoring options |
CLOCK | Clock source selection |
|
|
DISPLAY | Display contrast and backlight |
|
|
EDIT MARKER | Marker positions, |
|
|
DISCSPAN | |
|
|
RECORD | Record Sync & S/PDIF subcode options, Audio Threshold |
| level, other record options |
PARALLEL PORT | Allocation of parallel port connector to various |
| functions |
GENERAL | Timer and Eject inhibit options |
|
|
FIRMWARE | Displays current firmware information |
|
|
The options available within each submenu are described below.
28 | www.hhb.co.uk |