CHAPTER 3
Operation and Maintenance
Fixture Mode Menu
The Mode menu sets the module and protocol configuration and crossloads software from one fixture to other Orbital Head System systems on the link.
Crossloading Fixture Software
A fixture running a newer software version can load the new software to all other Orbital Head Systems on the link using the CROSSLOAD FIRMWARE menu option.
To CROSSLOAD FIRMWARE from one fixture to all Orbital Head System systems on the link:
1.Disconnect or bypass any controllers, serial data distributors, data line optoisolators, and any fixtures using
2.On the crossloading fixture only, unlock the menu system by pressing and holding down the Menu button until the extended
3.Using the left and right arrows on the Navigation button, scroll to the FIXTURE MODE MENU and press the Enter button to select.
4.Use the left and right arrows on the Navigation button to scroll to CROSSLOAD FIRMWARE.
5.Use the up and down arrows on the Navigation button to scroll to the YES option and press the Enter button to store. The fixture will upload its software to all other Orbital Head System systems on the link.
When the crossload has finished successfully, CROSSLOADING COMPLETE will appear briefly in the display of the crossloading fixture, and all other fixtures will automatically home.
Note: If a new boot code was included with the latest software, the fixture displays a BOOTDIFF error when it returns to the locked mode of the menu system. To correct the boot code, copy the new boot code to each fixture (see “Copying the Boot Code” on page
Protocol Mode
This option sets the Protocol to be followed in assigning Start Channels and programming parameters. STANDARD protocol is the default.
Roadster Orbital Head System User Manual | 23 |
